물건을 수리하세요 커뮤니티 상점

#3단계의 변경 사항

편집자 Yeong Haoyee-

편집 승인됨 완료자 Yeong Haoyee

이전
이후
변경 사항 없음

단계 라인

-[* black] Insert the crank arm puller into the hole that the screw was occupying.
-[* black] Use a crescent wrench to tighten the crank arm puller by twisting clockwise until the puller cannot be tightened further.
-[* icon_caution] Do not over tighten the crank arm puller. Once it begins to become hard to tighten, stop.
+[* black] Insert the crank arm puller into the screw hole.
+[* black] Now we use a crescent wrench to tighten the crank arm puller. Twist it in a clockwise direction until the puller is fully tightened.
+[* icon_caution] Do not over-tighten the crank arm puller. Stop once it's fully tightened.