주요 콘텐츠로 건너뛰기

#3단계의 변경 사항

Grant Haug- 에 의해 수정

편집 승인됨 완료자 Grant Haug

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* black] With the dial facing towards you, push the toaster base up and away from you until the base is just over the lip of the shell. This will disconnect the browning dial from the rest of the toaster, as shown in the photo.
[* icon_note] Note: When reassembling the toaster, make sure that the back of the dial lines up with the slot both in position and orientation (the dial and slot are not perfect circles - they have a notch).
[* black] The only thingobject holding the shell onto the toaster now is the grey part of the lever.
[* black] With the dial facing towards you, push the toaster base up and away from you until the base is just over the lip of the shell. This will disconnect the browning dial from the rest of the toaster, as shown in the photo.
[* icon_note] Note: When reassembling the toaster, make sure that the back of the dial lines up with the slot both in position and orientation (the dial and slot are not perfect circles - they have a notch).
[* black] The only thingobject holding the shell onto the toaster now is the grey part of the lever.