주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

#16단계의 변경 사항

Jeff Suovanen- 에 의해 수정

편집 승인됨 완료자 Jeff Suovanen

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Insert wisdom hereTest your new battery's fit and alignment carefully before installing it.
[* icon_note] Unlike most laptop batteries, the MacBook's battery is precisely contoured to fit the "terraced" shape of the lower case. Each cell must be correctly positioned, or the MacBook may not close correctly and damage may result.
[* black] Your replacement battery may come affixed to a thick plastic top liner to help keep the individual cells in position as you install it. Don't remove this liner until after the battery is installed.
[* black] If your battery came with adhesive pre-installed on the bottom, peel away the plastic liner covering the adhesive. If your battery did not come with adhesive, apply a thin double-sided adhesive tape such as [product|IF317-072-4|Tesa 61395|new_window=true] to the lower case in the areas marked in red.
[* black] Carefully position the battery and drop it into place. Press and hold each cell firmly for 5-10 seconds to secure it to the lower case.
[* icon_reminder] '''2015 models only''': After reassembly, remember to [guide|107711|connect your MacBook to low-voltage power] before turning it on.
[* black] Calibrate your battery before using it: allow it to drain overnight, then charge it to 100% and drain it again until your MacBook Pro shuts down automatically. Charge it again and use it normally.
[* icon_caution] Remember to re-enable your MacBook's '''autoboot''' function. If you notice any unusual behavior or problems after installing your new battery, you may need to [https://support.apple.com/en-gb/HT201295|reset your MacBook's SMC|new_window=true]
.
[* black] Insert wisdom hereTest your new battery's fit and alignment carefully before installing it.
[* icon_note] Unlike most laptop batteries, the MacBook's battery is precisely contoured to fit the "terraced" shape of the lower case. Each cell must be correctly positioned, or the MacBook may not close correctly and damage may result.
[* black] Your replacement battery may come affixed to a thick plastic top liner to help keep the individual cells in position as you install it. Don't remove this liner until after the battery is installed.
[* black] If your battery came with adhesive pre-installed on the bottom, peel away the plastic liner covering the adhesive. If your battery did not come with adhesive, apply a thin double-sided adhesive tape such as [product|IF317-072-4|Tesa 61395|new_window=true] to the lower case in the areas marked in red.
[* black] Carefully position the battery and drop it into place. Press and hold each cell firmly for 5-10 seconds to secure it to the lower case.
[* icon_reminder] '''2015 models only''': After reassembly, remember to [guide|107711|connect your MacBook to low-voltage power] before turning it on.
[* black] Calibrate your battery before using it: allow it to drain overnight, then charge it to 100% and drain it again until your MacBook Pro shuts down automatically. Charge it again and use it normally.
[* icon_caution] Remember to re-enable your MacBook's '''autoboot''' function. If you notice any unusual behavior or problems after installing your new battery, you may need to [https://support.apple.com/en-gb/HT201295|reset your MacBook's SMC|new_window=true]
.