Raleigh M20 Seat Cushion Replacement 단계 #1 기록

#1단계의 변경 사항

편집자 Dante Bozzini- 2012년 10월 18일

편집 승인됨 완료자 Dante Bozzini

	[* black] Fit the shaft of the seat into the frame, slid it in until the seat is at a height that you can sit at.
	[* black] While holding the seat at roughly the same height tighten the seat clamp by rotating it clockwise. Once your seat is locked in you are ready to ride.
+	[* black] I will add three pictures; one picturing the seat stand fitting into the frame, one picturing the seat being tightened, and one picturing the successfully added seat.