#1 단계의 변경 사항

Jacob Micallef- 에 의해 수정

편집 승인됨 에 의해 Jacob Micallef

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[title] Remove bolts and wire
[* red] Push the metal tab closest to the black wire down. While pushing the tab down, pull the black wire out of the clip.
[* orange] Using a 1/4 socket, remove the two bolts holding the alternator to the engine.
[* green] From the alternator side, gently pull the black wire out past the cylinder it is routed under on the engine.