#2단계의 변경 사항
편집자 Benjamin Yohe-
편집 승인됨 완료자 Benjamin Yohe
- 이전
- 이후
- 변경 사항 없음
단계 라인
| - | [* black] Remove screws with PH1 size screwdriver located underneath aligning cap, one on each side of the straightener. |
|---|---|
| - | [* black] Use prying tool to remove aligning rods after removal of the screws. |
| + | [* black] Remove the screws with the PH1 size screwdriver located underneath the aligning cap, one on each side of the straightener. |
| + | [* black] Use the prying tool to remove the aligning rods after the removal of the screws. |
| [* black] Gently separate each half of the hair straightener. | |
| [* icon_caution] Beware: the spring located in the middle of this mechanism may pop out and can get lost very easily, try to separate the two components slowly. |