#4단계의 변경 사항
편집자 Jared Stine-
편집 승인됨 완료자 Jared Stine
- 이전
- 이후
- 변경 사항 없음
단계 라인
- | [* black] While holding the nuts on the bottom side of the board in place with a wrench, tighten the bolts from the top side of the board with a screwdriver. Tighten bolts in a diagonal pattern until the head of the bolt sinks slightly |
---|---|
+ | [* black] While holding the nuts on the bottom side of the board in place with a wrench, tighten the bolts from the top side of the board with a screwdriver. Tighten bolts in a diagonal pattern until the head of the bolt sinks slightly into the grip tape. |