물건을 수리하세요 커뮤니티 상점

#4단계의 변경 사항

편집자 Daniel-

편집 승인됨 완료자 Daniel

이전
이후
변경 사항 없음

단계 라인

-[* black] While holding the nuts on the bottom side of the skateboard in place with the 3/8" wrench, tighten the bolts from the top side of the skateboard with a screwdriver. Tighten bolts in a diagonal pattern until the head of the bolt sinks slightly into the grip tape.
+[* black] While holding the nuts on the bottom side of the skateboard in place with the 3/8" wrench, tighten the screws from the top side of the skateboard with a screwdriver. Tighten the screws in a diagonal pattern until the head of the screw sinks slightly into the grip tape.
[* black] Repeat steps 1 - 6 to install the second truck.