Skip to main content

#7 단계의 변경 사항

Andrew Bookholt- 에 의해 수정

승인 대기 중

변경 사항이 없습니다

스텝 라인

[* black] Onto the logic board, which may be the most important of all the internal goodies. It regulates all the aspects of operation and safety for the device.
[* black] The logic board simply sits on brackets molded into the plastic housing. No screws!
[* black] Disconnect a couple of spade connectors from it, and slide it out a bit to reach the control panel ribbon cable connector.
[* black] Disconnect the control panel ribbon cable from the board. This should almost free the logic board from the rest of the blender.