메인 콘텐츠로 스킵하기

#10 단계의 변경 사항

Miroslav Djuric- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* red] Remove two Phillips screws (of the four holding together the entire device) from the brush/slip ring housing.
[* black] These puppies didn't come out without a fight.
[* black] No wonder why --- they're over 3" long! Containing the inertia of the rotor spinning at 28,000 rpm is ''kind of'' important.
[* black] No wonder why --- they're over 3" long! Containing the inertia of the rotor spinning at 28,000 rpm is ''kind of'' important.