주요 콘텐츠로 건너뛰기

Fix Your Stuff

Right to Repair

Parts & Tools

#3단계의 변경 사항

Mackey Hopen- 에 의해 수정

편집 승인됨 완료자 Mackey Hopen

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* black] Attach synchronization device to the second carb.
[* red] Using a flathead screw-driver, twist the screw in to raise the reading, and loosen to lower it
[*
black] TakeThe goal is the readingmeet the two values halfway
[* black] So, if one is higher than the other, lower the high one,
and adjust usingraise the low on until they meet in the middle
[* red] Using a flathead screw-driver, twist the screw in to raise the reading, and loosen to lower it
[*
black] TakeThe goal is the readingmeet the two values halfway
[* black] So, if one is higher than the other, lower the high one,
and adjust usingraise the low on until they meet in the middle

이미지 1

이전 이미지 없음

추가