주요 콘텐츠로 건너뛰기

Fix Your Stuff

Right to Repair

Parts & Tools

#4단계의 변경 사항

Ethan- 에 의해 수정

편집 승인됨 완료자 Ethan

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* black] Remove the following screws that secure the top and bottom halves of the base.
[* red] One 1/4 Phillips screw
[*
violet] Using aOne TA-20 screwdriver with at leastscrew
[* icon_note] Both screwdrivers must have a minimum of
a three inch shank (length), remove the bottom left security screwlength).
[* red] Using a Philips head screwdriver, remove the bottom right screw.
[* black] Note: screwdrivers
icon_note] Screwdrivers with extenders will not fit down the access holes.
[* black] Remove the following screws that secure the top and bottom halves of the base.
[* red] One 1/4 Phillips screw
[*
violet] Using aOne TA-20 screwdriver with at leastscrew
[* icon_note] Both screwdrivers must have a minimum of
a three inch shank (length), remove the bottom left security screwlength).
[* red] Using a Philips head screwdriver, remove the bottom right screw.
[* black] Note: screwdrivers
icon_note] Screwdrivers with extenders will not fit down the access holes.