주요 콘텐츠로 건너뛰기

Fix Your Stuff

Right to Repair

Parts & Tools

#3단계의 변경 사항

Arthur Shi- 에 의해 수정

편집 승인됨 완료자 Arthur Shi

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* icon_note] If you are following this guide to replace the Lightning connector, you can choose to keep the antenna cable connected and skip the next two steps. Be very careful not to strain the delicate antenna cable when you move the loudspeaker around.
[* black] Use the point of a spudger to lift and disconnect the antenna cable from its socket near the top of the logic board.
[* black] If you are following this guide for the charge port replacement ONLY. You do NOT need to disconnect or remove the antenna cable from the housing. Leave this cable connected and place the bottom part of this cable and speaker out of the way of the way during the rest of the repair.