#6단계의 변경 사항
편집자 Arthur Shi-
편집 승인됨 완료자 Arthur Shi
- 이전
- 이후
- 변경 사항 없음
단계 라인
| - | [* black] Carefully lift the antenna cable and de-route it from the edge of the phone. Use a spudger to help free it from the retaining clips. |
|---|---|
| + | [* black] Carefully lift the antenna cable and de-route it from the edge of the phone. Use the point of a spudger to help lift the cable free it from the retaining clips. |
| [* icon_note] If the cable does not have enough room to lift up, loosen [https://d3nevzfk7ii3be.cloudfront.net/igi/3veVYIPkSTMUcSxx|this Phillips screw|new_window=true] securing the logic board so that the board can give more wiggle room. | |
| [* icon_reminder] Be sure to re-tighten this screw during re-installation. | |
| [* icon_reminder] During re-installation, be sure to route the antenna cable [https://d3nevzfk7ii3be.cloudfront.net/igi/3lvDvX6SFcvlAXuH|underneath the logic board corner|new_window=true]. |