#6단계의 변경 사항
편집자 Arthur Shi-
편집 승인됨 완료자 Arthur Shi
- 이전
- 이후
- 변경 사항 없음
단계 라인
| [* black] Carefully lift the antenna cable and de-route it from the edge of the phone. Use the point of a spudger to help lift the cable free it from the retaining clips. | |
| [* icon_note] If the cable does not have enough room to lift up, loosen [https://d3nevzfk7ii3be.cloudfront.net/igi/3veVYIPkSTMUcSxx|this Phillips screw|new_window=true] securing the logic board so that the board can give more wiggle room. | |
| [* icon_reminder] Be sure to re-tighten this screw during re-installation. | |
| + | [* icon_note] If the cable snags near the SIM reader, it's likely caught on the SIM tray ejection mechanism. Use the point of a spudger to slide the plastic rod out of the way. |
| [* icon_reminder] During re-installation, be sure to route the antenna cable [https://d3nevzfk7ii3be.cloudfront.net/igi/3lvDvX6SFcvlAXuH|underneath the logic board corner|new_window=true]. | |
| - | [* icon_reminder] During |
| + | [* icon_reminder] During reassembly, you can also re-insert the SIM card tray after re-routing the antenna cable. |
| [* icon_caution] If you feel any resistance, ***stop*** and make sure that the tray isn't snagging the antenna cable. |