Skip to main content

#5 단계의 변경 사항

Mary Harold- 에 의해 수정

편집 승인됨 에 의해 Mary Harold

삭제되었습니다
추가되었습니다
변경 사항 없음

스텝 라인

[* black] Remove the four screws holding down the frame located at the bottom of the inverted blender using the PH2 screwdriver head
[* black] Cut the zip tie holdthat holds the black, blue, red, and yellow wires together *CAUTION* dotake care not to cut the wires
[* black] Cut the zip tie holdthat holds the black, blue, red, and yellow wires together *CAUTION* dotake care not to cut the wires