메인 콘텐츠로 스킵하기

#2 단계의 변경 사항

Kristen Gismondi- 에 의해 수정

편집 승인됨 에 의해 Kristen Gismondi

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* red] Carefully lift up the MLB board. Underneath it is another ZIF connector. Use a spudger to flip the small flap on the ZIF connector.
[* icon_note] This will take a few tries to get it done correctly. Remember to not use too much force as you do not want to damage the ZIF connector.
[* black] Remove the MLB Board by flipping the device over and letting it fall into your hands.
[* icon_reminder] Reassembly Tip: Completely remove the ribbon cable from the case, reattach it to the MLB board, then place the board and ribbon cable back into its original position.
[* icon_reminder] Reassembly Tip: Completely remove the ribbon cable from the case, reattach it to the MLB board, then place the board and ribbon cable back into its original position.