메인 콘텐츠로 스킵하기

이 단계의 변경 사항

Billy Pho- 에 의해 수정

편집 승인됨 에 의해 Billy Pho

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* blackred] Using the AMP/MLB ribbon cable, reconnect the MLB side to the appropriate ZIF connector on the MLB Board. It will be the side that is more circular.
[* black] Slip the AMP/MLB ribbon cable through the original hole and firmly press it against the case.
[* icon_note] There is a very small bump on the case and a corresponding hole on the ribbon cable. Align these together for an easier time pressing the ribbon cable.
[* blackred] Using the AMP/MLB ribbon cable, reconnect the MLB side to the appropriate ZIF connector on the MLB Board. It will be the side that is more circular.
[* black] Slip the AMP/MLB ribbon cable through the original hole and firmly press it against the case.
[* icon_note] There is a very small bump on the case and a corresponding hole on the ribbon cable. Align these together for an easier time pressing the ribbon cable.

이미지 1

이전 버전

새로운 버전