메인 콘텐츠로 스킵하기

이 단계의 변경 사항

Billy Pho- 에 의해 수정

편집 승인됨 에 의해 Billy Pho

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* red] Using the AMP/MLB ribbon cable, reconnect the MLB side to the appropriate ZIF connector on the MLB Board. It will be the side that is more circular.
[* blacklight_blue] Slip the AMP/MLB ribbon cable through the originallarge hole and firmly press itthe cable against the case.
[* icon_note] There is a veryare two small bumpbumps on the case and atwo corresponding holeholes on the ribbon cable. Align these together for an easier time pressinga snug fit.
[* black] Reattach
the ribbon cablesmall rectangular plastic piece.
[* red] Using the AMP/MLB ribbon cable, reconnect the MLB side to the appropriate ZIF connector on the MLB Board. It will be the side that is more circular.
[* blacklight_blue] Slip the AMP/MLB ribbon cable through the originallarge hole and firmly press itthe cable against the case.
[* icon_note] There is a veryare two small bumpbumps on the case and atwo corresponding holeholes on the ribbon cable. Align these together for an easier time pressinga snug fit.
[* black] Reattach
the ribbon cablesmall rectangular plastic piece.

이미지 2

이전 이미지가 없습니다

추가

이미지 3

이전 이미지가 없습니다

추가