주요 콘텐츠로 건너뛰기

## #4 단계의 변경 사항

Group 3- 에 의해 수정

편집 승인됨 에 의해 Group 3

삭제되었습니다
추가
변경 사항이 없습니다

### 스텝 라인

 [* black] The cone has tooriginal coil must have a can placed over it. The suspension must be glued on first with gorilla glue. Thenglue then the cone. The dust cover needs to be glued in the center of the speaker. The surround then has to be glued around the speakers frame, but carefully as there are screw holes that must be cleared from the surround. Wait for the glue to harden. [* black] The cone has tooriginal coil must have a can placed over it. The suspension must be glued on first with gorilla glue. Thenglue then the cone. The dust cover needs to be glued in the center of the speaker. The surround then has to be glued around the speakers frame, but carefully as there are screw holes that must be cleared from the surround. Wait for the glue to harden.