#24단계의 변경 사항
편집자 Andrew Bookholt-
- 이전
- 이후
- 변경 사항 없음
단계 라인
| + | [* black] Rotate the top of the logic board toward yourself slightly. |
|---|---|
| + | [* black] Pull the right edge of the logic board toward yourself slightly to free the I/O ports from the rear case, being careful not to bend the board. |
| + | [* black] Continue rotating the board toward yourself until you have enough room to reach the SATA connector, shown in the next step. |
이미지 1
이전 이미지 없음
추가