주요 콘텐츠로 건너뛰기

#1 단계의 변경 사항

Tim Cedar- 에 의해 수정

편집 승인됨 에 의해 Tim Cedar

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* red] There are five tabs underneath the keyboard that hold the keyboard in place along the top edge. Refer to the photo for a rough idea of the location of these tabs.
[* black] Using the spudger and iFixit Opening Tool, wedgeTool at the tool inside the space of each tab. Use the tool as a lever toindiated locations, pry the keyboard directly up, following the hinge at the edge of the keyboard closest to youup. Ensure that the tool reachestools reach under both the plastic keyboard cover and the metal base of the keyboard, as both will be removed.
[* black] Use multiple tools to lift all the tabs at once.icon_note] Once you have a few tools in place, it's possible to slide your tool along the underside of the keyboard and unclip all of the tabs at once.
[* black] Once all five tabs along the top are removed, the keyboard should pop off quite easily, following the hinge at the bottom side ofRemove the boardkeyboard.
[* black] Using the spudger and iFixit Opening Tool, wedgeTool at the tool inside the space of each tab. Use the tool as a lever toindiated locations, pry the keyboard directly up, following the hinge at the edge of the keyboard closest to youup. Ensure that the tool reachestools reach under both the plastic keyboard cover and the metal base of the keyboard, as both will be removed.
[* black] Use multiple tools to lift all the tabs at once.icon_note] Once you have a few tools in place, it's possible to slide your tool along the underside of the keyboard and unclip all of the tabs at once.
[* black] Once all five tabs along the top are removed, the keyboard should pop off quite easily, following the hinge at the bottom side ofRemove the boardkeyboard.