주요 콘텐츠로 건너뛰기

#8 단계의 변경 사항

Andrew Krasts- 에 의해 수정

편집 승인됨 에 의해 Andrew Krasts

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Insert a new 250mm spoke into the hub and work around other spokes until it is aligned with the nipplenipple in the rim.
[* icon_note] Try and keep the spoke as straight as possible when threading it around the other spokes. Slight bends will be taken out when it is tightened
.
[* black] Insert a new 250mm spoke into the hub and work around other spokes until it is aligned with the nipplenipple in the rim.
[* icon_note] Try and keep the spoke as straight as possible when threading it around the other spokes. Slight bends will be taken out when it is tightened
.

이미지 2

이전 이미지가 없습니다

추가