메인 콘텐츠로 스킵하기

#2 단계의 변경 사항

Aaron Ramadan- 에 의해 수정

편집 승인됨 에 의해 Aaron Ramadan

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* blackred] Using the same P1 philips screwdriver and bit, remove the two screws as shown and gently pull back green logic board.
[* icon_caution] Caution: remove gently, circuit board is connected by wire to board.
[* icon_reminder] Spring may be under compression, don't lose it.
[* blackred] Using the same P1 philips screwdriver and bit, remove the two screws as shown and gently pull back green logic board.
[* icon_caution] Caution: remove gently, circuit board is connected by wire to board.
[* icon_reminder] Spring may be under compression, don't lose it.

이미지 1

이전 버전

새로운 버전