메인 콘텐츠로 스킵하기

#2 단계의 변경 사항

Daniel Hoffman- 에 의해 수정

편집 승인됨 에 의해 Daniel Hoffman

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* red] Using the same P1 philips screwdriver and bit, remove the two 10.0 mm screws as shown and gently pull back green circuit board.
[* icon_caution] Caution: remove gently, circuit board is connected by wire to board. Removing cable from console case may allow more slack.
[* icon_caution] Caution: remove gently, circuit board is connected by wire to board. Removing cable from console case may allow more slack.
[* icon_reminder] Spring may be under compression, don't lose it.

이미지 1

이전 버전

새로운 버전