Skip to main content

#2 단계의 변경 사항

Gabriel Robinson- 에 의해 수정

편집 승인됨 에 의해 Gabriel Robinson

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* red] Using the same PH1 Philips screwdriver and bit, removeunscrew the two 1.0 cm10.0 mm screws as shown and gently pull back the green circuit board.
[* red] Using the same PH1 Philips screwdriver and bit, removeunscrew the two 1.0 cm10.0 mm screws as shown and gently pull back the green circuit board.
[* icon_caution] Remove gently, circuit board is connected by wire to board. Removing cable from console case may allow more slack.
[* icon_reminder] SpringThe button springs may be under compression, don't lose itthem.
[* icon_reminder] SpringThe button springs may be under compression, don't lose itthem.