주요 콘텐츠로 건너뛰기

#3단계의 변경 사항

Kyle Mott- 에 의해 수정

편집 승인됨 완료자 Justin Ogihara

이전
이후
변경 사항이 없습니다

단계 라인

-[* red] Take a plastic pry tool and work towards the top right of the LCD ribbon cable to pry the cable from the logic board.
+[* red] Using a plastic pry tool, carefully pry the LCD ribbon cable from the logic board.
[* icon_caution] Do not use a metal pry tool. Metal pry tools can cause damage to the logic board and to the ribbon cable.
[* icon_note] This LCD ribbon cable sends signal from the logic board to the LCD screen.
-[* black] Once unplugged move the cable aside.