주요 콘텐츠로 건너뛰기

#6단계의 변경 사항

Taylor Dixon- 에 의해 수정

편집 승인됨 완료자 Taylor Dixon

이전
이후
변경 사항이 없습니다

단계 라인

-[* black] Align the new foot inside the well.
+[* black] Align the new foot inside the cavity.
[* icon_note] Make sure the alignment nub on the foot is lined up with the small hole near the perimeter of the pad.
[* black] Lay the foot down while keeping it properly aligned.
[* black] Check for proper alignment from the inside of the case. The alignment nub should be slightly visible through the alignment hole.