Skip to main content

#4 단계의 변경 사항

Kristen Gismondi- 에 의해 수정

편집 승인됨 에 의해 Kristen Gismondi

삭제되었습니다
추가되었습니다
변경 사항 없음

스텝 라인

[* blackred] Unscrew the smaller 3.0 mm Phillips #1#00 screw located in the center on the back of the device next to the magnetic circle with a Phillips 00 screwdriverdevice.
[* blackorange] Flip the camera over and unscrew the center 3.0 mm Phillips #1#00 screw located above to the SYNC button with a Phillips 00 screwdriverbutton.
[* blackred] Unscrew the smaller 3.0 mm Phillips #1#00 screw located in the center on the back of the device next to the magnetic circle with a Phillips 00 screwdriverdevice.
[* blackorange] Flip the camera over and unscrew the center 3.0 mm Phillips #1#00 screw located above to the SYNC button with a Phillips 00 screwdriverbutton.

이미지 1

이전 버전

새로운 버전

이미지 2

이전 버전

새로운 버전