주요 콘텐츠로 건너뛰기

#4 단계의 변경 사항

Christina McManus- 에 의해 수정

편집 승인됨 에 의해 Christina McManus

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] RemoveUnscrew the smaller screw located in the center on the back of the device next to the magnetic circle with a Phillips 00 screwdriver.
[* black] Flip the camera over and removeunscrew the center screw located next to the SYNC button.
[* icon_note] All case screws are the same size.

[* black] UseFollow these instructions in revers order to install the plastic opening toolsame or new case panels to gently remove the remaining paneldevice.
[* black] RemoveUnscrew the smaller screw located in the center on the back of the device next to the magnetic circle with a Phillips 00 screwdriver.
[* black] Flip the camera over and removeunscrew the center screw located next to the SYNC button.
[* icon_note] All case screws are the same size.

[* black] UseFollow these instructions in revers order to install the plastic opening toolsame or new case panels to gently remove the remaining paneldevice.