주요 콘텐츠로 건너뛰기

#4단계의 변경 사항

Christina McManus- 에 의해 수정

편집 승인됨 완료자 Christina McManus

이전
이후
변경 사항이 없습니다

단계 라인

-[* black] Unscrew the smaller screw located in the center on the back of the device next to the magnetic circle with a Phillips 00 screwdriver.
-[* black] Flip the camera over and unscrew the center screw located above to the SYNC button.
+[* black] Unscrew the smaller 3.0 mm Phillips #1 screw located in the center on the back of the device next to the magnetic circle with a Phillips 00 screwdriver.
+[* black] Flip the camera over and unscrew the center 3.0 mm Phillips #1 screw located above to the SYNC button with a Phillips 00 screwdriver.