Skip to main content

#4 단계의 변경 사항

Christina McManus- 에 의해 수정

편집 승인됨 에 의해 Christina McManus

삭제되었습니다
추가되었습니다
변경 사항 없음

스텝 라인

[* black] Unscrew the smaller 3.53.0 mm Phillips #1 screw located in the center on the back of the device next to the magnetic circle with a Phillips 00 screwdriver.
[* black] Flip the camera over and unscrew the center 3.53.0 mm Phillips #1 screw located above to the SYNC buttonbutton with a Phillips 00 screwdriver.
[* black] Unscrew the smaller 3.53.0 mm Phillips #1 screw located in the center on the back of the device next to the magnetic circle with a Phillips 00 screwdriver.
[* black] Flip the camera over and unscrew the center 3.53.0 mm Phillips #1 screw located above to the SYNC buttonbutton with a Phillips 00 screwdriver.