Giant Reign 2 Hydraulic Brake Fluid Replacement 단계 #1 기록

#1단계의 변경 사항

편집자 Theodore Newman- 2012년 11월 30일

편집 승인됨 완료자 Theodore Newman

	[* black] Pull out and rotate the quick release lever until the axle is loose.
-	[* black] Pull back on the derailleur and pull off the rear wheel.
+	[* black] Pull back on the derailleur on the left hand side. This would remove the tension holding the rear wheel in place.
+	[* black] Pull the wheel in a downward motion to remove the wheel.
+	[* icon_note] If there is a replacement wheel the bike may not have a quick release. In which case you would need to use the correct wrench size to loosen the axial.