주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

#3단계의 변경 사항

Ben Ingleson- 에 의해 수정

편집 승인됨 완료자 Ben Ingleson

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Repeat the same process as in Step 6 to release the flat ribbon cable from the black rectangular latch
[* red] Unscrew the 4 black screws that hold the black motherboard on.
[* icon_note] Theorange] Release the clip at the bottom left corner of the black motherboard by pinching the wings at either side of the clip.
[* icon_note] Be sure
that holds the cables totransparent case or the black motherboard can remain in place forare being held or resting on a surface so that neither falls when the following steps, but can be released for more access if neededclip is released.
[* icon_note] Theorange] Release the clip at the bottom left corner of the black motherboard by pinching the wings at either side of the clip.
[* icon_note] Be sure
that holds the cables totransparent case or the black motherboard can remain in place forare being held or resting on a surface so that neither falls when the following steps, but can be released for more access if neededclip is released.