주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

#1단계의 변경 사항

Brett Hartt- 에 의해 수정

편집 승인됨 완료자 Brett Hartt

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Lay the iOpener clear-side down, flat on the edge of the device, over an adhesive seal you wish to heat. The liquid will flatten the iOpener against the surface, ensuring good heat conduction.
[* black] Let the bag sit on the device for approximately 90 seconds before attempting to open the front panel.
[* black] At this point you should be able to begin prying under the screen with a plastic opening tool. Be sure to see your device's [[Topic:iPad|specific guide]] for where and how to do this.
[* icon_caution] Throughout the procedure you will need to reheat the iOpener. To prevent overheating the iOpener, always wait at least three minutes before microwaving again.until the iOpener has cooled enough to touch safely. ( Do not microwave the iOpener for more than thirty seconds at a time.
[* icon_caution] Throughout the procedure you will need to reheat the iOpener. To prevent overheating the iOpener, always wait at least three minutes before microwaving again.until the iOpener has cooled enough to touch safely. ( Do not microwave the iOpener for more than thirty seconds at a time.