Skip to main content

#6 단계의 변경 사항

Benjamin Gee- 에 의해 수정

편집 승인됨 에 의해 Benjamin Gee

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[title] Replace oil bolt
[* light_blue] InsertClean up the drainage hole with paper towel
[* icon_note] You may need to use a paper towel to wipe up any beading
oil bolt by hand, turning clockwise
[* blue] Finish tighteningInsert the bolt using the allen wrenchbolt, turning clockwise
[* violet] Tighten the bolt by hand untilwith the 5/16 allen wrench until the wrench won't turn any further. This is plenty tight.
[* icon_note] Clean up any dripping oil around the whole with a paper towel
[* light_blue] InsertClean up the drainage hole with paper towel
[* icon_note] You may need to use a paper towel to wipe up any beading
oil bolt by hand, turning clockwise
[* blue] Finish tighteningInsert the bolt using the allen wrenchbolt, turning clockwise
[* violet] Tighten the bolt by hand untilwith the 5/16 allen wrench until the wrench won't turn any further. This is plenty tight.
[* icon_note] Clean up any dripping oil around the whole with a paper towel

이미지 1

이전 이미지가 없습니다

추가

이미지 2

이전 이미지가 없습니다

추가

이미지 3

이전 이미지가 없습니다

추가