주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

#2단계의 변경 사항

Sam Goldheart- 에 의해 수정

편집 승인됨 완료자 Sam Goldheart

삭제됨
추가
변경 사항이 없습니다

단계 라인

[title] Soften* black] Use a hairdryer or [guide|25705|prepare an iOpener|new_window=true] and apply it to the lower edge of the iPod for about a minute in order to soften up the adhesive with hair dryer
[* black
underneath.
[* red
] The bottom of the screen (near the home button) is held in place with strong adhesive.
[* black] Use a heat gun or hair dryer (low setting) to soften the
adhesive.
[title] Soften* black] Use a hairdryer or [guide|25705|prepare an iOpener|new_window=true] and apply it to the lower edge of the iPod for about a minute in order to soften up the adhesive with hair dryer
[* black
underneath.
[* red
] The bottom of the screen (near the home button) is held in place with strong adhesive.
[* black] Use a heat gun or hair dryer (low setting) to soften the
adhesive.
[* black] As you start prying the screen off in the next stages, you may need to apply more heat to keep the glue warm and flexible.

이미지 1

이전 버전

새로운 버전

이미지 2

이전 이미지 없음

추가