주요 콘텐츠로 건너뛰기

#13단계의 변경 사항

Andrew Optimus Goldheart- 에 의해 수정

편집 승인됨 완료자 Andrew Optimus Goldheart

이전
이후
변경 사항이 없습니다

단계 라인

-[* black] Insert another guitar pick under the bottom left corner of the front panel, breaking the adhesive beneath it.
- [* icon_note] If the guitar pick is hard to press in, reheat the iOpener for 30 seconds and reapply it to the iPad for another 90 seconds to re-soften the adhesive.
-[* black] Slide the guitar pick toward the home button, breaking the adhesive beneath.
- [* icon_caution] For this pick, be sure to only slide toward the center, to prevent damage to the Wi-Fi antenna, located beneath the lower bezel.
+[* black] Leave the opening pick in the iPad slightly past the front-facing camera.
+[* icon_note] Take a second pick and insert it to the left of the camera, where the first pick just was. Slide it back to the corner to completely cut any remaining adhesive.
+[* black] Leave the second pick in place to prevent the corner adhesive from re-sealing as it cools.

이미지 1

이전 버전

새로운 버전

이미지 2

이전 버전

새로운 버전

이미지 3

이전 이미지 없음

추가