메인 콘텐츠로 스킵하기

#21 단계의 변경 사항

Andrew Optimus Goldheart- 에 의해 수정

편집 승인됨 에 의해 Andrew Optimus Goldheart

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* icon_note] Leave the pick from the last step in place to prevent the adhesive from re-sealing.
[*
black] SlideWith a new pick, slice gently over the plastic opening tool aroundleft-hand antenna, stopping before the home button.
[* icon_caution] Only slide the pick from the outer edge toward the center of the iPad. Do not move the pick back toward the outer edge, as moving in this direction may damage the antenna.
[* icon_note] If you need to slide the pick over the lower section more than once, remove it and re-insert at the outer edge, and slide inwards.
[* black] Leave
the iPad's top right cornerpick in place before moving on.
[* icon_note] Leave the pick from the last step in place to prevent the adhesive from re-sealing.
[*
black] SlideWith a new pick, slice gently over the plastic opening tool aroundleft-hand antenna, stopping before the home button.
[* icon_caution] Only slide the pick from the outer edge toward the center of the iPad. Do not move the pick back toward the outer edge, as moving in this direction may damage the antenna.
[* icon_note] If you need to slide the pick over the lower section more than once, remove it and re-insert at the outer edge, and slide inwards.
[* black] Leave
the iPad's top right cornerpick in place before moving on.

이미지 1

이전 버전

새로운 버전

이미지 2

이전 버전

새로운 버전

이미지 3

이전 이미지가 없습니다

추가