주요 콘텐츠로 건너뛰기

#6단계의 변경 사항

Andrew Bookholt- 에 의해 수정

승인 대기 중

이전
이후
변경 사항이 없습니다

단계 라인

-[* black] Insert wisdom here.
+[* icon_note] In the next few steps you will separate the LCD from the adhesive applied to the upper and lower edges of the LCD relief machined into the front bezel.
+[* icon_caution] The adhesive is applied such that it sticks to a thin steel strip around the perimeter of the LCD. When prying your LCD away from the front panel, be sure you are separating the front panel from the metal strip on the LCD.
+[* black] Use the flat end of a spudger to gently lift one of the top corners of the LCD out of the front bezel.