Skip to main content

#7 단계의 변경 사항

Andrew Optimus Goldheart- 에 의해 수정

편집 승인됨 에 의해 Andrew Optimus Goldheart

삭제되었습니다
추가되었습니다
변경 사항 없음

스텝 라인

[* icon_note] The LCD is glued to the metal LCD shield plate behind it along itsthe top, left, and right edges. In order to safely loosen this adhesive, you'll be using a guitar pick to slideshift the LCD slightlya couple of millimeters left and right several times.
[* icon_note] The LCD is glued to the metal LCD shield plate behind it along itsthe top, left, and right edges. In order to safely loosen this adhesive, you'll be using a guitar pick to slideshift the LCD slightlya couple of millimeters left and right several times.
[* black] Insert a guitar pick into the gap between the LCD and rear case, near the top of the left side of the LCD.
[* black] Bend the pick slightly away from the iPad, just enough to spread the gap between the LCD and rear case.