Skip to main content

#10 단계의 변경 사항

Andrew Optimus Goldheart- 에 의해 수정

편집 승인됨 에 의해 Andrew Optimus Goldheart

삭제되었습니다
추가되었습니다
변경 사항 없음

스텝 라인

[* icon_note] In the next few steps, you'll be sliding a spudger between the LCD and the metal backing plate to fully separate the LCD from the adhesive beneath.
[*
black] Insert wisdom herethe flat end of a spudger between the LCD frame and the metal backing plate.
[* icon_caution] Be sure to get the spudger between the LCD frame and backing plate, and not beneath the plate. The plate is screwed down to the rear case, so prying up on it will damage it
.
[* icon_note] In the next few steps, you'll be sliding a spudger between the LCD and the metal backing plate to fully separate the LCD from the adhesive beneath.
[*
black] Insert wisdom herethe flat end of a spudger between the LCD frame and the metal backing plate.
[* icon_caution] Be sure to get the spudger between the LCD frame and backing plate, and not beneath the plate. The plate is screwed down to the rear case, so prying up on it will damage it
.