주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

#10단계의 변경 사항

Andrew Optimus Goldheart- 에 의해 수정

편집 승인됨 완료자 Andrew Optimus Goldheart

이전
이후
변경 사항이 없습니다

단계 라인

[* icon_note] In the next few steps, you'll be sliding a spudger between the LCD and the metal backing plate to fully separate the LCD from the adhesive beneath.
[* black] Insert the flat end of a spudger between the LCD frame and the metal backing plate.
[* icon_caution] Be sure to get the spudger between the LCD frame and backing plate, and not beneath the plate. ThePrying up on the plate will damage it, because it is screwed down to the rear case, so prying up on it will damage itcase beneath the LCD.
[* icon_caution] Be sure to get the spudger between the LCD frame and backing plate, and not beneath the plate. ThePrying up on the plate will damage it, because it is screwed down to the rear case, so prying up on it will damage itcase beneath the LCD.