주요 콘텐츠로 건너뛰기

#11단계의 변경 사항

Andrew Optimus Goldheart- 에 의해 수정

편집 승인됨 완료자 Andrew Optimus Goldheart

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* black] Starting at the top right of the device, slide the spudger in between the LCD frame and metal backing plate, which will separate the adhesive as you push.
[* black] Starting at the top right of the device, slide the spudger in between the LCD frame and metal backing plate, which will separate the adhesive as you push.
[* icon_note] The goal is to separate the adhesive, not to pry the LCD up, so keep the pointed tip of the spudger as low as possible to prevent bending the LCD.
[* icon_caution] If inserting the spudger causes the corner of the LCD to bend up, repeat the steps with the guitar pick to further loosen the adhesive.
[* icon_caution] If inserting the spudger causes the corner of the LCD to bend up, repeat the steps with the guitar pick to further loosen the adhesive.