주요 콘텐츠로 건너뛰기

#13 단계의 변경 사항

Andrew Optimus Goldheart- 에 의해 수정

편집 승인됨 에 의해 Andrew Optimus Goldheart

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] DoContinue with the same with the lastleft side of the LCD: insert the flat end of the spudger between the LCD and shield plate and insert the spudger as far as it will go.
[* icon_note] At this point the LCD should be loosened from the adhesive holding it. If it is not, re-insert the spudger on the right side or top to fully free the LCD.
[* black] DoContinue with the same with the lastleft side of the LCD: insert the flat end of the spudger between the LCD and shield plate and insert the spudger as far as it will go.
[* icon_note] At this point the LCD should be loosened from the adhesive holding it. If it is not, re-insert the spudger on the right side or top to fully free the LCD.