주요 콘텐츠로 건너뛰기

#2단계의 변경 사항

Pieter van den berg- 에 의해 수정

편집 승인됨 완료자 Pieter van den berg

이전
이후
변경 사항이 없습니다

단계 라인

[title] Lifting the Back glass.
[* black] With some alcohol and a suction cup pry the back glass from the frame gently.
[* black] When you see a small gap, insert a spatula or pick to loosen up the adhesive.
+[* black] Slide the pick around the device to loosen the back glass.
[* black] ***BE CAREFUL OF THE FINGERPRINT SENSOR FLEX!.*** The flex connects at the top right corner of the device so do not enter the pick in too deep.