주요 콘텐츠로 건너뛰기

#2단계의 변경 사항

Kiarra- 에 의해 수정

편집 승인됨 완료자 Kiarra

이전
이후
변경 사항이 없습니다

단계 라인

-[* red] Position the rectangular plate over the phillips #5 wood screw holes (15mm) on the left width.
- [* icon_note] There are six phillips #5 wooden screw holes in total (15mm). Four wooden screw holes (15mm) are on the left width of the panel and two additional screw holes are on the width's side.
+[* red] Position the rectangular plate over the Phillips #5 wood screw holes (15mm) on the left width.
+ [* icon_note] There are six Phillips #5 wooden screw holes in total (15mm). Four wooden screw holes (15mm) are on the left width of the panel and two additional screw holes are on the width's side.
[* black] Repeat this step with the right width of the panel.
[* icon_note] The rectangular plates that will be fastened to the left and right width are connected to chains. The chains are connected to another hinge piece. It will later be connected to the main desk frame.