주요 콘텐츠로 건너뛰기

#4단계의 변경 사항

Kiarra- 에 의해 수정

편집 승인됨 완료자 Kiarra

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Position the hemispherical plates over the left hemispherical hole on the length of the panel.
[* black] Repeat this step with the right length of the panel.
[* icon_note] A hemisphere is the half of a circle.
-[* black] Use the phillips #2 screwdriver to turn the #5 wood screws and tighten the hemispherical plates along the length of the drop-front panel.
+[* black] Use the phillips #2 screwdriver to turn the three #5 wood screws and tighten the hemispherical plates along the length of the drop-front panel.