주요 콘텐츠로 건너뛰기

#11단계의 변경 사항

Adam O'Camb- 에 의해 수정

편집 승인됨 완료자 Adam O'Camb

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Use the point of a spudger to lift the display cable connector up and out of its socket on the motherboard.
[* icon_reminder] To re-attach [guide|25629|press connectors|stepid=70308|new_window=true] like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage.
[* icon_reminder] If any part of your screen doesn't respond to touch after your repair re-seat this connector, making sure it clicks fully into place and that there's no dust or other obstruction in the socket.
+[* icon_reminder] During reassembly, pause here if you wish to [guide|120052|replace the adhesive around the edges of the display|new_window=true].