주요 콘텐츠로 건너뛰기

#1 단계의 변경 사항

Walter Galan- 에 의해 수정

편집 승인됨 에 의해 Walter Galan

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* red] Remove the three 1.3 mm Phillips #00 screws securing the connector shield to the logic board.
[* black] On reassembly, beicon_caution] Be sure not to not substitute these three screws forwith any other screws, specifically the similar screws used to attachsecuring the large LCD shield. Thoseshield plate to the rear case of the iPad. Any slightly longer screws will breakmay strip the screw bracketsholes and result in irreparable damage to the motherboardlogic board.
[* black] On reassembly, beicon_caution] Be sure not to not substitute these three screws forwith any other screws, specifically the similar screws used to attachsecuring the large LCD shield. Thoseshield plate to the rear case of the iPad. Any slightly longer screws will breakmay strip the screw bracketsholes and result in irreparable damage to the motherboardlogic board.